Globe control valve BR11

Globe control valve BR11
The globe control valve BR 11 is used in automated, industrial installations to control the flow of gases and liquids.

High-Performance control valve BR 12

High-Performance control valve BR 12
The high-performance control valve BR 12 is used in automated industrial installations to control the flow of steam, gases and liquids.

3-way valve BR 13

3-way valve BR 13
The 3-way control valve BR 13 is used to mix or divide media streams.

Rotary plug valve BR 33

RoRotary plug valve BR 33
The range of applications of the rotary plug valve BR 33 corresponds to the "normal" stroke valve, but it can also be used for many specialist applications.

Pressure regulator ZSN (self-operated regulator)

Pressure regulator ZSN (self-operated regulator)
Series ZSN pressure regulators operate through pre-set downstream pressure (ZSN 1) or upstream pressure (ZSN 3) without auxiliary power (controlled by the transported media).

Pneumatic actuators P/R and P1/R1

Pneumatic actuators P/R and P1/R1
The pneumatic multi-spring diaphragm actuators of P/R (pillar actuator) and P1/R1 (cast yoke) are used to control the control valves and other control elements in industrial automated systems.

Standard control valve BR 51

Standard control valve BR 51
Single-ported globe control valves type BR51 are used in automatic and remote control systems to control flow of gases and liquids.

Three-piece ball valve BR 831-Series

Three-piece ball valve
BR831 series three-piece ball valve has optimized flow characteristic, and can provide larger valve flow capacity. It also has the advantages of online maintenance and replacement.

Floating ball valve BR 835F Series

Floating ball valve
BR835F series floating ball valve without ball support shaft, the ball is two-seat holder which was in "floating" state. On the pipe, it is mainly used to cut, distribution, and change the direction of medium flow.

Three-way ball valve BR 835M Series

Three-way ball valve
BR 835M series ball valve is divided into L-type and T-type. L-type is used to change the flow direction, enabling two mutually perpendicular channels communicates; T-type for the media sub or switch, enabling three channels interconnected.

Trunnion ball valve BR 835M Series

Trunnion ball valve
Compare to normal ball valve, BR835T series trunnion ball valve have higher pressure rating and bigger size due to the trunnion structure of the ball.

PTFE/PFA lined ball valve BR 835P Series

PTFE/PFA lined ball valve
BR835P series PTFE / PFA lined ball valve suitable for corrosive fluid. The valve body is lined with PTFE / PFA / FEP, the valve ball and shaft are also wrapped PTFE / PFA / FEP, therefore it has excellent resistance to chemical fluid corrosion.

Ceramic ball valve BR 835Z Series

Ceramic ball valve
BR835Z series ceramic ball valve, be applicable to the high corrosion, high wear, high temperature medium pressure condition.

V-port segment ball valve BR 835V Series

V-port segment ball valve
BR 835V series V-port segment ball valve is a quarter-turn senior control valve. V type valve core is designed with special shape of V notch, so have a lot of shear force and consecrated themselves function.

Centric/ high performance butterfly valve BR 820/829 Series

Centric/ high performance butterfly valve
BR82 series butterfly valve can be used as regulation and interception device to deal with corrosive, non-corrosive gases, liquids, semi-fluid and solid medium in pipelines and containers of powder.

PTFE/PFA lined butterfly valve BR 823 Series

PTFE/PFA lined butterfly valve
The BR 823 series PTFE/PFA lined butterfly valve, the valve body, disc are lined with PTFE/PFA material, which is suitable for acids, alkalis, strong oxidizing agents, organic solvents, and other corrosive medium.

PTFE/PFA lined ball valve BR 835P-Series

BR 835P series PTFE / PFA lined ball valve suitable for corrosive fluid. The valve body is lined with PTFE / PFA / FEP, the valve ball and shaft are also wrapped PTFE / PFA / FEP, therefore it has excellent resistance to chemical fluid corrosion. It is widely used in petroleum, chemical, metallurgy, pharmaceutical and other industries, realizing to regulate or cut off the acid and alkali in the process of production, such as strong corrosive medium.

 

Features

Nominal Diameter:DN15 to DN300 (1/2” to 12”)
Pressure Rating:PN10 to PN16 (ANSI 150 lbs)
Connections:
Flanged:ANSI B 16.5 (RF)
Body material:
WCB (1.0619 / GP240GH / WCB)
PTFE or PFA lined
Stainless steel (1.4408 / CF8 / CF8M / CF3 / CF3M)
PTFE、PFA or FEP lined
Trim material:
Stainless steel, PTFE/PFA/FEP lined
Working temperature:
-29℃ to +150℃
Flow characteristic KVS:
Quick opening/cut off
Leakage class: Soft sealing VI
Actuator:
PRS/PRD series pneumatic actuator;
NN series manual drive;
Electric actuator specified by the customers
No CE marking