Globe control valve BR11

Globe control valve BR11
The globe control valve BR 11 is used in automated, industrial installations to control the flow of gases and liquids.

High-Performance control valve BR 12

High-Performance control valve BR 12
The high-performance control valve BR 12 is used in automated industrial installations to control the flow of steam, gases and liquids.

3-way valve BR 13

3-way valve BR 13
The 3-way control valve BR 13 is used to mix or divide media streams.

Rotary plug valve BR 33

RoRotary plug valve BR 33
The range of applications of the rotary plug valve BR 33 corresponds to the "normal" stroke valve, but it can also be used for many specialist applications.

Pressure regulator ZSN (self-operated regulator)

Pressure regulator ZSN (self-operated regulator)
Series ZSN pressure regulators operate through pre-set downstream pressure (ZSN 1) or upstream pressure (ZSN 3) without auxiliary power (controlled by the transported media).

Pneumatic actuators P/R and P1/R1

Pneumatic actuators P/R and P1/R1
The pneumatic multi-spring diaphragm actuators of P/R (pillar actuator) and P1/R1 (cast yoke) are used to control the control valves and other control elements in industrial automated systems.

Standard control valve BR 51

Standard control valve BR 51
Single-ported globe control valves type BR51 are used in automatic and remote control systems to control flow of gases and liquids.

Three-piece ball valve BR 831-Series

Three-piece ball valve
BR831 series three-piece ball valve has optimized flow characteristic, and can provide larger valve flow capacity. It also has the advantages of online maintenance and replacement.

Floating ball valve BR 835F Series

Floating ball valve
BR835F series floating ball valve without ball support shaft, the ball is two-seat holder which was in "floating" state. On the pipe, it is mainly used to cut, distribution, and change the direction of medium flow.

Three-way ball valve BR 835M Series

Three-way ball valve
BR 835M series ball valve is divided into L-type and T-type. L-type is used to change the flow direction, enabling two mutually perpendicular channels communicates; T-type for the media sub or switch, enabling three channels interconnected.

Trunnion ball valve BR 835M Series

Trunnion ball valve
Compare to normal ball valve, BR835T series trunnion ball valve have higher pressure rating and bigger size due to the trunnion structure of the ball.

PTFE/PFA lined ball valve BR 835P Series

PTFE/PFA lined ball valve
BR835P series PTFE / PFA lined ball valve suitable for corrosive fluid. The valve body is lined with PTFE / PFA / FEP, the valve ball and shaft are also wrapped PTFE / PFA / FEP, therefore it has excellent resistance to chemical fluid corrosion.

Ceramic ball valve BR 835Z Series

Ceramic ball valve
BR835Z series ceramic ball valve, be applicable to the high corrosion, high wear, high temperature medium pressure condition.

V-port segment ball valve BR 835V Series

V-port segment ball valve
BR 835V series V-port segment ball valve is a quarter-turn senior control valve. V type valve core is designed with special shape of V notch, so have a lot of shear force and consecrated themselves function.

Centric/ high performance butterfly valve BR 820/829 Series

Centric/ high performance butterfly valve
BR82 series butterfly valve can be used as regulation and interception device to deal with corrosive, non-corrosive gases, liquids, semi-fluid and solid medium in pipelines and containers of powder.

PTFE/PFA lined butterfly valve BR 823 Series

PTFE/PFA lined butterfly valve
The BR 823 series PTFE/PFA lined butterfly valve, the valve body, disc are lined with PTFE/PFA material, which is suitable for acids, alkalis, strong oxidizing agents, organic solvents, and other corrosive medium.

High-performance control valve BR 12

The High-performance control valve BR 12 is used in automated industrial installations to control the flow of steam, gases and liquids. The wide range of materials, different configuration options and excellent pressure and temperature parameters allow the valve to be used even under the most difficult operating conditions and make it especially popular in the power plant sector.

Features

Nominal sizes: DN 15; 20; 25; 40; 50; 80; 100; 150; 200; 250 ( DN 300 after technical clarification)
Nominal pressure: PN10 - PN420 or ANSI CL150 - CL2500
Face to face DIN EN 60534-3-1 or ANSI B16.10
Kvs-values of 0,1 up to 800 (larger Kvs-values upon consultation)
Characteristic curves: equal percentage, linear, OPEN/SHUT
Leakage classes (according to DIN EN 60534-4): IV (< 0,1 % Kvs); V (ground in)
Temperature range: -196°C to +650°C
Body materials: 1.0619 / WCB; 1.7379 / WC9; 1.6220; 1.4408 / CF8M
Configuration with flange or welding ends, TA-Luft, bellows seal bonnet possible
Version BR 12a: single or multi-stage plugs, perforated plug, perforated cage
Version BR 12b: single or multi-stage plugs, balanced valve plug, control and additional perforated cages.
The various seat and plug combinations (parabolic, piston and perforated plug as well as various perforated cages) serve to reduce noise and cavitation, reduce wear through flashing and eliminate chocked flow.
SIL-certification